eSUN ABS+HS Red 1.75 mm 1 kg - ABS+HS175R1P1
28.50 €
eSUN ABS+HS Red is a 1.75 mm ABS+ filament on a 1 kg spool for high-speed FDM printing, with a 230-270 °C nozzle range and 95-110 °C heated-bed support for durable, low-warp parts.
Доступно через 6–10 рабочих дней : 37 шт.
For any questions about this item, availability, or delivery times, please contact us at 22 270068
eSUN ABS+HS in Red is a modified ABS+ filament for high-speed FDM printing. It is 1.75 mm diameter on a 1 kg paper/cardboard spool.
eSUN specifies lower shrinkage and stronger interlayer adhesion than conventional ABS, with low-VOC, lower-odour printing. Official guidance is 230-270 °C at the nozzle, 95-110 °C on a heated bed, and speeds of 50-300 mm/s in an enclosed chamber. Acetone polishing is supported.
- Material: ABS+
- Diameter: 1.75 mm
- Net weight: 1 kg
- Color: Red
- Recommended nozzle temperature: 230-270 °C
- Recommended bed temperature: 95-110 °C
| Brand | eSUN |
| Product Type | ABS+HS Filament |
| MPN | ABS+HS175R1P1 |
| EAN | 6922572205031 |
| Material | ABS+ |
| Color | Red |
| Diameter | 1.75 mm |
| Net Weight | 1 kg / 1000 g |
| Recommended Nozzle Temperature | 230-270 °C |
| Recommended Bed Temperature | 95-110 °C |
| Spool Type | Paper / cardboard spool |
| Printing Technology | FDM / FFF |
| Surface Finish | Standard |
| Print Speed | 50-300 mm/s |
| Heat Distortion Temperature | 89 °C (0.45 MPa) |
| Density | 1.04 g/cm³ |
| Fan Speed | 0% |
| Special Properties | High Speed, Low Warping |
