USB Type-C Adapter, USB A - USB-C
The DIGITUS USB Type A to USB-C adapter allows USB Type-C devices to be used on an older USB A port. The adapter supports the USB 3.0 specification with data transfers of up to 5Gb…
Το προϊόν δεν είναι διαθέσιμο
Αυτό το προϊόν δεν είναι διαθέσιμο αυτή τη στιγμή. Μπορούμε να σας προτείνουμε εναλλακτικές ή να προσπαθήσουμε να το βρούμε για εσάς. Καλέστε μας στο 22 270068 ή email [email protected].
The DIGITUS USB Type A to USB-C adapter allows USB Type-C devices to be used on an older USB A port. The adapter supports the USB 3.0 specification with data transfers of up to 5Gbps and provides a maximum power of 15W (3A). By simply flipping the USB-C connector, you can switch between USB 3.0 and USB 2.0 speeds, provided they are supported by the USB A port. The integrated 56k pull-up resistor protects the devices from damage caused by overload and only supplies as much power as the connected USB-C device needs.
| Typ | Adapter |
| EAN | 4016032467410 |
| Manufacturer no. | AK-300524-000-S |
| Connection - from | 1x USB-C (socket) |
| Warnings and safety information | Safety instructions: When plugging and unplugging the cable, only hold it by the plug and do not pull directly on the cable. Cables should not be sharply kinked or bent at tight angles as this may damage the internal wires and cause failure. Make sure that the cables are not under tensile stress, as this can damage the insulation and wires inside the cable. Ensure that cables are not routed in areas where they can easily be mechanically damaged. Cables should not be used in extremely high or very low temperature environments. Pay attention to the product information regarding the maximum operating temperature of the cable Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately to avoid failures, short circuits or even electric shock. |