WireView Pro II - Sensor
155.50 €
Power consumption meter designed for demanding GPUs with 12V 2×6 plugs; the successor to the WireView Pro.
Available in 6–10 business days : 50 τεμάχιο
For any questions about this item, availability, or delivery times, please contact us at 22 270068
The WireView Pro II was specifically developed for the demanding use of modern high-end graphics cards with 12V 2×6 plugs and is the further developed version of the WireView Pro. The current is not only recorded as a total value, but also per wire of the 12V 2×6 plug. This allows potential contact problems between the cable and graphics card to be identified immediately. The WireView Pro II was specifically designed to enable precise monitoring of the 12V 2×6 connector, thereby detecting load distribution problems early and preventing possible damage to the graphics card and the 12V 2×6 connector.
| Typ | Power consumption meter |
| Color | schwarz |
| EAN | 4260711992490 |
| Manufacturer no. | TG-WV-P2-H19N |
| Art | Sensor |
| use | Graphics cards |
| Heatsink material | Aluminium |
| Feature | Display: TFT-IPS-Display |
| Notice | The WireView Pro II is available with the 12VHPWR 16-pin power connector (4x Sensor + 12x Power/Ground) in the “Normal” (N) and “Reverse” (R) versions: If the graphics card is equipped with power connectors in which the four sensor pins of the connector are located between the PCB and the 12 power connectors, the “N” variant is required (PCB - 4x sensor pin - 12x power connector).If the graphics card is equipped with power connectors where the 12 power connectors are located between the PCB and the four sensor pins of the connector, the “R” variant is required (PCB - 12x power connector - 4x sensor pin). |
| Accessories - available | USB-C to USB 2.0 internal connection cable (30 cm), Y-splitter for power function on the mainboard, short temperature sensor (5 cm), long temperature sensor (20 cm) |
